Table of Contents
Advertisement
3
BIOS Setup
Load from this Bank
To load the setting saved in the bank, move the cursor to "Load
from this Bank" then press <Enter>. The setting in this bank will
replace the current setting. Make sure to save before you exit the
BIOS setup utility by selecting "Y" in the "Save & Exit Setup"
submenu.
Hotkey
You can now load a BIOS setting during system boot up; bypassing
the lengthy process of entering the BIOS utility to load a setting.
Move the cursor to "Hotkey" then press <Enter>. Select the key you
would like to use to load the settings from the bank. When the
system boots up, press the key to load the setting.
91
Hide quick links:
Advertisement
Table of Contents
