DFI LANParty Jr. GF9400 T2RS User Manual page 65

IDE Function Setup
IDE DMA Transfer Access
IDE Prefetch Mode
IDE HDD Block Mode
↑↓→←
: Move
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
IDE DMA Transfer Access
This field is used to enable or disable the DMA transfer function of
an IDE hard drive.
IDE Prefetch Mode
This allows data and addresses to be stored in the internal buffer of
the chip, thus reducing access time. Enable this field to achieve better
performance.
IDE HDD Block Mode
Enabled
Disabled
Phoenix - AwardBIOS CMOS Setup Utility
IDE Function Setup
Enabled
Enabled
Enabled
Enter: Select +/-/PU/PD: Value
F6: Fail-Safe Defaults
The IDE HDD uses the block mode. The system
BIOS will check the hard disk drive for the
maximum block read/write per sector the system
can transfer. The block size will depend on the
type of hard disk drive.
The IDE HDD uses the standard mode.
BIOS Setup
Item Help
Menu Level
F10: Save ESC: Exit F1: General Help
F7: Optimized Defaults
3
65