Table of Contents
Advertisement
RAID BIOS
The AMD BIOS utility is used to configure and manage RAID on Serial ATA drives.
After you power up the system and all drives have been detected, the AMD BIOS
status message screen will appear. Press the <F4> key to enter the utility. The
utility allows you to build a RAID system on Serial ATA drives.
Important:
Before creating RAID, make sure you have installed the Serial ATA drives
and connected the data cables otherwise you won't be able to enter the
RAID BIOS utility.
Refer to chapter 5 for steps in configuring RAID.
3
BIOS Setup
71
Advertisement
Table of Contents
