Power On Function - DFI LANParty Jr. GF9400 T2RS User Manual

Onboard Super IO Device

Power On Function

x KB Power On Password
x Hot Key Power On
Onboard FDC Controller
Onboard Serial Port
Onboard IRDA Select
x IR Mode Select
x UR2 Duplex Mode
PWRON After PWR-Fail
↑↓→←
: Move
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
Power On Function
This field allows you to use the keyboard or PS/2 mouse to power-
on the system.
Button only
Password
Hot Key
Mouse Move
Mouse Click
Any Key
Keyboard 98
Phoenix - AwardBIOS CMOS Setup Utility
Onboard Super IO Device
Button Only
Enter
Ctrl-F1
Enabled
3F8/IRQ4
Disabled
IrDA
Half
Off
Enter: Select +/-/PU/PD: Value
F6: Fail-Safe Defaults
Default setting. Uses the power button to power
on the system.
When this option is selected, set the password
you would like to use to power-on the system in
the "KB Power On Password" field.
When this option is selected, select the function
key you would like to use to power-on the
system in the "Hot Key Power On" field.
Move the PS/2 mouse to wake up the system.
Click the PS/2 mouse to wake up the system.
Press any key to power-on the system.
When this option is selected, press the "wake
up" key of the Windows 98 compatible
keyboard to power-on the system.
BIOS Setup
Item Help
Menu Level
F10: Save ESC: Exit F1: General Help
F7: Optimized Defaults
3
67