DFI LANParty Jr. GF9400 T2RS User Manual page 66

3
BIOS Setup
MCP Storage Config
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
Serial-ATA Controller
This field is used to enable or disable the Serial ATA controller.
SATA Operation Mode
This field is used to configure SATA devices.
IDE
RAID
AHCI
Linux AHCI
66
Phoenix - AwardBIOS CMOS Setup Utility
Serial-ATA Controller
SATA Operation Mode
: Move Enter: Select
This option configures the Serial ATA drives as
Parallel ATA storage devices.
This option allows you to create RAID configuration
on Serial ATA devices.
This option allows the Serial ATA devices to use
AHCI (Advanced Host Controller Interface).
This option allows the Serial ATA devices to use
Linux AHCI.
Onboard PCI Device
Enabled
IDE
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults