Via Raid Bios Setting Utility; Exit Without Saving - DFI PT880-ALE User Manual

3
BIOS Setup

3.1.13 Exit Without Saving

When you do not want to save the changes you have made,
highlight "Exit Without Saving" and press <Enter>.
Type "Y" and press <Enter>. The system will reboot and you will
once again see the initial diagnostics on the screen. If you wish to
make any changes to the setup, press <Ctrl> <Alt> <Esc> simul-
taneously or <Del>

3.2 VIA RAID BIOS Setting Utility

The VIA RAID BIOS Setting Utility is used to configure and man-
age RAID on Serial ATA drives.
After you power up the system and all hard disk drives have
been detected, the VIA RAID BIOS status message screen will
appear. Press the <Tab> key to enter the utility. The utility allows
you to build a RAID system using two Serial ATA (SATA) hard
drives.
86
after memory testing is done.
Note:
Refer to the VIA SATA RAID manual for information on using
the utility. The manual is included in the CD.