Raid Bios - DFI Infinity NF650I Ultra User Manual

RAID BIOS

The NVRAID BIOS utility is used to configure and manage RAID on
Serial ATA drives.
After you power up the system and all drives have been detected,
the NVRAID BIOS status message screen will appear. Press the
<F10> key to enter the utility. The utility allows you to build a RAID
system on Serial ATA drives.
Important:
Before creating RAID, make sure you have installed the Serial
ATA drives and connected the data cables otherwise you won't
be able to enter the RAID BIOS utility.
Refer to chapter 5 for steps in configuring RAID.
3
BIOS Setup
121