Via Raid Bios - DFI K8M800 INFINITY User Manual

3.1.14 Exit Without Saving
When you do not want to save the changes you have made,
highlight "Exit Without Saving" and press <Enter>.
Type "Y" and press <Enter>. The system will reboot and you will
once again see the initial diagnostics on the screen. If you wish to
make any changes to the setup, press <Ctrl> <Alt> <Esc> simulta-
neously or <Del>

3.2 VIA RAID BIOS

The VIA RAID BIOS utility is used to configure and manage RAID
on Serial ATA drives.
After you power up the system and all hard disk drives have been
detected, the VIA RAID BIOS status message screen will appear.
Press the <Tab> key to enter the utility. The utility allows you to
build a RAID system using two Serial ATA (SATA) hard drives.
after memory testing is done.
3
BIOS Setup
97