DFI LANParty Jr. GF9400 T2RS User Manual page 43

The power connectors from the power supply unit are designed to
fit the 24-pin and 8-pin connectors in only one orientation. Make
sure to find the proper orientation before plugging the connectors.
A FDD-type power connector provides auxiliary power to a
graphics card. We recommend that you plug a power cable from the
power supply unit to the 5V/12V power connector. This will provide
more stability to the entire system. The system board will still work
even if the additional power connector is not connected.
4
1
+5V
+12V
Ground
Ground
The system board requires a minimum of 300 Watt power supply
to operate. Your system configuration (CPU power, amount of
memory, add-in cards, peripherals, etc.) may exceed the minimum
power requirement. To ensure that adequate power is provided, we
strongly recommend that you use a minimum of 400 Watt (or
greater) power supply.
Important:
Insufficient power supplied to the system may result in instabil-
ity or the add-in boards and peripherals not functioning prop-
erly. Calculating the system's approximate power usage is im-
portant to ensure that the power supply meets the system's
consumption requirements.
Hardware Installation
2
43