DFI LANParty Jr. GF9400 T2RS User Manual page 52

3
BIOS Setup
Primary IDE Master to Internal Phy SATA 4
Primary IDE Master/Slave
Secondary IDE Master/Slave
Internal Phy SATA 1
Internal Phy SATA 3
Internal Phy SATA 2
Internal Phy SATA 4
Primary IDE Master to Secondary IDE Slave
To configure IDE drives, move the cursor to a field then press
<Enter>. The following screen will appear.
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
IDE HDD Auto-Detection
Detects the parameters of the drive. The parameters will automati-
cally be shown on the screen.
52
Note:
The fields for configuring Serial ATA drives will appear only if the
Serial ATA function is Enabled. Enable this function in the Inte-
grated Peripherals submenu of the BIOS.
Phoenix - AwardBIOS CMOS Setup Utility
IDE HDD Auto-Detection
Primary IDE Master
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
: Move Enter: Select
Used to configure Parallel ATA drives
Used to configure Serial ATA drives
Primary IDE Master
Press Enter
Auto
Auto
0 MB
0
0
0
0
0
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Item Help
Menu Level
To auto-detect the
HDD's size, head... on
this channel
ESC: Exit F1: General Help
F7: Optimized Defaults