Via Raid Bios Setting Utility - DFI PT880-AL User Manual

3.1.13 Exit Without Saving
When you do not want to save the changes you have made,
highlight "Exit Without Saving" and press <Enter>.
Type "Y" and press <Enter>. The system will reboot and you will
once again see the initial diagnostics on the screen. If you wish to
make any changes to the setup, press <Ctrl> <Alt> <Esc> simul-
taneously or <Del> after memory testing is done.

3.2 VIA RAID BIOS Setting Utility

The VIA RAID BIOS Setting Utility is used to configure and man-
age RAID on Serial ATA drives.
After you power up the system and all hard disk drives have
been detected, the VIA RAID BIOS status message screen will
appear. Press the <Tab> key to enter the utility. The utility allows
you to build a RAID system using two Serial ATA (SATA) hard
drives.
Note:
Refer to the VIA SATA RAID manual for information on using
the utility. The manual is included in the CD.
BIOS Setup
87
3