Cooling Fan Connectors - DFI LANParty Jr. GF9400 T2RS User Manual

bracket to an available slot at the rear of the system chassis then
connect the serial port cable to this connector. The colored edge of
the cable should align with pin 1 of this connector.

Cooling Fan Connectors

1
3
Sense Ground
Power
1st Fan
1
3
Sense Ground
Power
2nd Fan
These fan connectors are used to connect cooling fans. Cooling fans
will provide adequate airflow throughout the chassis to prevent over-
heating the CPU and system board components.
Hardware Installation
Sense
Power
Speed
Ground Control
1
CPU fan
1
3
Sense Ground
Power
System fan
2
4
39