3
BIOS Setup
Intel RAID BIOS (LT600-DR only)
The Intel ICH7R chip allows configuring RAID on Serial ATA drives. It
supports RAID 0, RAID 1, RAID 0+1 and RAID 5.
When the system powers-up and all drives have been detected, the
Intel BIOS status message screen will appear. Press the <Ctrl> and
<I> keys simultaneously to enter the utility. The utility allows you to
build a RAID system on Serial ATA drives.
Refer to chapter 5 for steps in configuring RAID.
9 8
Important:
Before creating RAID, make sure you have installed the Serial
ATA drives and connected the data cables otherwise you won't
be able to enter the RAID BIOS utility.