GS-3012/GS-3012F User's Guide
The following table describes the labels in this screen.
Table 32 Link Aggregation: Link Aggregation Protocol Status
LABEL
Index
Aggregator ID
Enabled Port
Synchronized
Ports
Poll Interval(s)
Stop
14.3 Link Aggregation Setup
Click Configuration in the Link Aggregation Protocol Status screen to display the screen
shown next.
You can configure up to six link aggregation groups and each group can aggregate up to six
ports.
97
DESCRIPTION
This field displays the trunk ID to identify a trunk group, that is, one logical link
containing multiple ports.
Refer to
Section 14.1.2 on page 96
These are the ports you have configured in the Link Aggregation screen to be in
the trunk group.
These are the ports that are currently transmitting data as one logical link in this
trunk group.
The text box displays how often (in seconds) this screen refreshes. You may
change the refresh interval by typing a new number in the text box and then clicking
Set Interval.
Click Stop to halt statistic polling.
for more information on this field.
Chapter 14 Link Aggregation