ZyXEL Communications GS-3012F User Manual page 179

GS-3012/GS-3012F User's Guide
Table 74 Command Summary: Configure Mode (continued)
COMMAND
ip address
address default-
gateway
name-server
route
lacp
system-priority
loginPrecedenc <LocalOnly |
e LocalRADIUS |
RADIUSOnly>
logins username <name>
password <pwd>
username <name>
privilege <0-14>
logout
mac-aging-time <10-3000>
mac-filter name <name> mac
<mac-addr> vlan
<vlan-id> drop
<src/dst/both>
179
DESCRIPTION
Sets the IP address and subnet mask of the
<ip> <mask>
out-of-band management port.
Sets the default gateway's IP address for
<ip>
the out-of-band management port.
Sets the IP address of a domain name
<ip>
server.
Creates a static route.
<ip> <mask>
<next-hop-ip>
Sets the metric of a static route or
<ip> <mask>
deactivates a static route.
<next-hop-ip>
[metric
<metric>] [name
<name>]
[inactive]
Enables Link Aggregation Control Protocol
(LACP).
Sets the priority of an active port using
<1-65535>
LACP.
Select which database the switch should
use (first) to authenticate a user.
Configures up to four read-only login
accounts.
Sets the access privilege for the existing
login accounts. The higher the value, the
more commands are allowed.
All commands are categorized into three
groups:
Unprivileged: enable, exit, help,
history, logout, ping, show, ssh,
traceroute
Login-setting: admin-password, login-
Precedence, logins, multi-login,
password, no logins, no multi-login
Config: includes all commands except the
unprivileged and login-setting commands
A user with a privilege of 0 to 12 can only
use the unprivileged commands.
A user with a privilege of 13 can use the
unprivileged or config commands.
A user with a privilege of 14 can use all
commands.
Exits the CLI.
Sets learned MAC aging time.
Configures a static MAC address port
filtering rule.
Chapter 30 Introducing the Commands