GS-3012/GS-3012F User's Guide
Table 61 General Commands for GUI-based FTP Clients
COMMAND
Transfer Type
Initial Remote Directory
Initial Local Directory
24.7.4 FTP Restrictions
FTP will not work when:
• FTP service is disabled in the Access Control screen.
• The IP address(es) in the Secured Client Set in the Remote Management screen does
not match the client IP address. If it does not match, the switch will disconnect the Telnet
session immediately
151
DESCRIPTION
Transfer files in either ASCII (plain text format) or in binary mode.
Configuration and firmware files should be transferred in binary mode.
Specify the default remote directory (path).
Specify the default local directory (path).
Chapter 24 Maintenance