GS-3012/GS-3012F User's Guide
31.8.14 speed-duplex
Syntax:
where
<auto|10-
half|10-
full|100-
half|100-
full|1000-
full>
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set the speed to 10 Mbps in half duplex mode.
Figure 148 speed-duplex Command Example
ras(config)# interface port-channel 1,3-5
ras(config-interface)# speed-duplex 10-half
211
speed-duplex <auto|10-half|10-full|100-half|100-full|1000-full>
Sets the duplex mode (half, full) and speed (10/100/1000 Mbps)
of the connection on the interface. Selecting auto (auto-
negotiation) makes one port able to negotiate with a peer
automatically to obtain the connection speed and duplex mode
that both ends support.
Chapter 31 Command Examples