Qos Priority; Name; Figure 146 Qos Priority Command Example; Figure 147 Name Command Example - ZyXEL Communications GS-3012F User Manual

31.8.12 qos priority

Syntax:
where
<0 .. 7>
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set the IEEE 802.1p quality of service priority as four (4).

Figure 146 qos priority Command Example

ras(config)# interface port-channel 1,3-5
ras(config-interface)# qos priority 4

31.8.13 name

Syntax:
where
<port-name-
string>
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set a name for the interfaces.

Figure 147 name Command Example

ras(config)# interface port-channel 1,3-5
ras(config-interface)# name Test
Chapter 31 Command Examples
qos priority <0 .. 7>
Sets the quality of service priority for an interface(s).
name <port-name-string>
Sets a name for your port interface(s).
GS-3012/GS-3012F User's Guide
210