ZyXEL Communications GS-3012F User Manual page 185

GS-3012/GS-3012F User's Guide
Table 74 Command Summary: Configure Mode (continued)
COMMAND
<port-list>
<port-list> learn
inactive
<port-list>
address-limit
<number>
<port-list> MAC-
freeze
queue level <0-7>
priority <0-7>
radius-server host <ip> [acct-
port <socket-
number>] [key <key-
string>]
remote- <index>
management
<index> start-addr
<ip> end-addr <ip>
service <[telnet]
[ftp][http][icmp]
[snmp][ssh][https]
>
service- ftp <socket-
control number>
http <socket-
number> <timeout>
https <socket-
number>
icmp
snmp
ssh <socket-
number>
telnet <socket-
number>
snmp-server [contact <system
contact>]
[location <system
location>]
get-community
<property>
185
DESCRIPTION
Enables the port security feature on the
specified port(s).
Disables MAC address learning on the
specified port(s).
Limits the number of (dynamic) MAC
addresses that may be learned on a port.
Disables MAC address learning and enables
port security.
Note: All previously learned
dynamic MAC addresses are
saved to the static MAC
address table.
Sets the priority level-to-physical queue
mapping.
Sets the IP address of the external RADIUS
server, UDP port and shared key.
Enables a specified secured client set.
Specifies a group of trusted computer(s)
from which an administrator may use a
service to manage the switch.
Allows FTP access on the specified service
port.
Allows HTTP access on the specified
service port and defines the timeout period.
Allows HTTPS access on the specified
service port.
Allows ICMP access to the switch such as
pinging and tracerouting.
Allows SNMP management.
Allows SSH access on the specified service
port.
Allows Telnet access on the specified
service port.
Sets the geographic location and the name
of the person in charge of this switch.
Sets the get community.
Chapter 30 Introducing the Commands