Link Aggregation Setup; Figure 52 Link Aggregation Control Protocol Status; Table 34 Link Aggregation Control Protocol Status - ZyXEL Communications ES-4124 User Manual

Figure 52 Link Aggregation Control Protocol Status

The following table describes the labels in this screen.

Table 34 Link Aggregation Control Protocol Status

LABEL
Index
Aggregator ID
Enabled Port
Synchronized
Ports

15.4 Link Aggregation Setup

Click Configuration in the Link Aggregation Control Protocol Status screen to display the
screen shown next. See
Chapter 15 Link Aggregation
DESCRIPTION
This field displays the trunk ID to identify a trunk group, that is, one logical link
containing multiple ports.
Link Aggregator ID consists of the following: system priority, MAC address, key, port
priority and port number. Refer to
this field.
These are the ports you have configured in the Link Aggregation screen to be in the
trunk group.
These are the ports that are currently transmitting data as one logical link in this trunk
group.
Section 15.1 on page 119
Section 15.2.1 on page 120
for more information on link aggregation.
ES-4124 User's Guide
for more information on
121