This chapter explains the Diagnostic screens.
25.1 Diagnostic
Click Management and then Diagnostic in the navigation panel to display this screen. Use
this screen to check system logs, ping IP addresses or perform loopback tests on a port.
Figure 97 Diagnostic
The following table describes the labels in this screen.
Table 62 Diagnostic
LABEL
System Log
IP Ping
Ethernet Port
Test
Chapter 25 Diagnostic
DESCRIPTION
Click Display to display a log of events in the multi-line text box.
Click Clear to empty the text box and reset the syslog entry.
Type the IP address of a device that you want to ping in order to test a connection.
Click Ping to have the switch ping the IP address (in the field to the left).
From the Port drop-down list box, select a port number and click Port Test to perform
internal loopback test.
GS-3012/GS-3012F User's Guide
C
H A P T E R
Diagnostic
2 5
152