Show Logging; Show Interface; Figure 118 Show Ip Command Example; Figure 119 Show Logging Command Example - ZyXEL Communications GS-3012F User Manual

GS-3012/GS-3012F User's Guide

Figure 118 show ip Command Example

ras> show ip
Out-of-band Management IP Address = 192.168.0.1
Management IP Address
IP[192.168.0.1], Netmask[255.255.255.0], VID[0]
IP Interface
IP[192.168.1.1], Netmask[255.255.255.0], VID[1]
ras>

31.2.4 show logging

Note: This command is not available in User mode.
Syntax:
This command displays the system logs. The following figure shows an example.

Figure 119 show logging Command Example

ras# show logging
57 Thu Jan
58 Thu Jan
59 Thu Jan
60 Thu Jan
61 Thu Jan
62 Thu Jan
63 Thu Jan
Clear Error Log (y/n):
Note: If you clear a log (by entering
cannot view it again.

31.2.5 show interface

Syntax:
This command displays statistics of a port. The following example shows that port 10 is up
and the related information.
195
show logging
1 00:00:05 1970 PINI
1 00:00:02 1970 PP0c -WARN
1 00:00:05 1970 PINI -WARN
1 00:00:05 1970 PINI -WARN
1 00:00:05 1970 PINI
1 00:00:10 1970 PP24
1 00:14:36 1970 PP0c -WARN
y
show interface [port-number]
INFO main: init completed
SNMP TRAP 3: link up
SNMP TRAP 0: cold start
SNMP TRAP 3: link up
INFO main: init completed
INFO adjtime task pause 1 day
SNMP TRAP 2: link down
at the "
Clear Error Log (y/n):
Chapter 31 Command Examples
" prompt), you