Figure 82 Mvr Group Configuration; Table 56 Mvr Group Configuration - ZyXEL Communications GS-3012F User Manual

GS-3012/GS-3012F User's Guide
Note: A port can belong to more than one multicast VLAN. However, IP multicast
group addresses in different multicast VLANs cannot overlap.

Figure 82 MVR Group Configuration

The following table describes the labels in this screen.

Table 56 MVR Group Configuration

LABEL
Multicast VLAN
ID
Name
Start Address
End Address
Add
Cancel
MVLAN
Name
Start Address
End Address
Delete
Cancel
139
DESCRIPTION
Select a multicast VLAN ID (that you configured in the MVR screen) from the drop-
down list box.
Enter a descriptive name for identification purposes.
Enter the starting IP multicast address of the multicast group in dotted decimal
notation.
Refer to Section 21.1.1 on page 131
Enter the ending IP multicast address of the multicast group in dotted decimal
notation.
Enter the same IP address as the Start Address field if you want to configure only
one IP address for a multicast group.
Refer to Section 21.1.1 on page 131
Click Add to save the settings.
Click Cancel to discard all changes.
This field displays the multicast VLAN ID.
This field displays the descriptive name for this setting.
This field displays the starting IP address of the multicast group.
This field displays the ending IP address of the multicast group.
Select Delete All and click Delete to remove all entries from the table.
Select Delete Group and click Delete to remove the selected entry(ies) from the
table.
Select Cancel to clear the checkbox(es) in the table.
for more information on IP multicast addresses.
for more information on IP multicast addresses.
Chapter 21 Multicast