No Port-Access-Authenticator; No Ssh; Figure 143 No Port-Access-Authenticator Command Example - ZyXEL Communications GS-3012 Series User Manual

Chapter 33 Command Examples

33.7.3 no port-access-authenticator

Syntax:
no port-access-authenticator
no port-access-authenticator
no port-access-authenticator
where
An example is shown next.
• Disable authentication on the switch.
• Disable re-authentication on ports one, three, four and five.
• Disable authentication on ports one, six and seven.

Figure 143 no port-access-authenticator Command Example

sysname(config)# no port-access-authenticator
sysname(config)# no port-access-authenticator 1,3-5 reauthenticate
sysname(config)# no port-access-authenticator 1,6-7

33.7.4 no ssh

Syntax:
no ssh key <rsa1|rsa|dsa>
no ssh known-hosts <host-ip> <cr>
no ssh known-hosts <host-ip> [1024|ssh-rsa|ssh-dsa]
where
An example is shown next.
• Disable the secure shell RSA1 encryption key.
• Remove the remote host with IP address 172.165.1.8 from the list of known hosts.
248
<port-list> reauthenticate
<port-list>
Disables port authentication on the switch.
Disables the re-authentication mechanism on the listed ports.
<port-list>
reauthenticate
Disables authentication on the listed ports.
<port-list>
Disables the secure shell server encryption key. Your
key
<rsa1|rsa|dsa>
switch supports SSH versions 1 and 2 using RSA and DSA
authentication.
Remove specific remote hosts from the list of all known
known-hosts
<host-ip>
hosts.
Remove remote known hosts with a specified public key
known-hosts
<host-ip>
(1024-bit RSA1, RSA or DSA).
[1024|ssh-
rsa|ssh-dsa]
GS-3012/GS-3012F User's Guide