Figure 26: Battery Charger - Rear - Varta element 3 Instruction Manual


Remove the following power cables from the battery
charger:
 Battery power connection,
 Comm 1 (error and warning messages)
 Comm 2 (RJ11) and
 Comm 3 (RJ45)

Push a screwdriver into the side mounting slots to
dislocate the battery charger.
Aid: Slotted screwdriver

Pull the battery charger approximately half-way out of the
compartment.

Remove the inverter connection at the rear.

Figure 26: Battery charger - rear


Pull the battery charger out of the compartment using
both hands.
Subject to alteration! Updated 11/2015 99