Table 8: Grid Parameter Default Settings - Varta element 3 Instruction Manual

In addition to the default values, the minimum and maximum
values for the voltage between the phases can be set via the
numerical input fields.

Minimum voltage between two of the three phases
(within the limits: 0 – 600 V)

Maximum voltage between two of the three phases
(within the limits: 0 – 600 V)
Country
Germany
Austria
France
Italy
Netherlands

Table 8: Grid parameter default settings

Note: If the Automatic option is not selected, the following
parameters can also be set to suit the individual requirements of
the grid operator:

Minimum grid frequency (FGRID_MIN)

Maximum grid frequency (FGRID_MAX)

Minimum grid voltage (UGRID_MIN)
84
Grid parameters
47.50 51.50
47.50 51.50
47.50 51.50
47.50 51.50
47.50 51.50
Subject to alteration!
184 264
184 264
184 264
184 264
184 264
Updated 11/2015
253
258
253
253
253