Checking The System Parameters; Checking The Online Status (Service); Error History (Service) - Varta element 3 Instruction Manual

11.2

Checking the system parameters

The service and repair work must also include a system
parameter check. This work is done via the web interface. For
operation in the password-protected area, see Chapter 9.
The checks to be recorded in the service booklet (Sections 11.2.1
to 11.2.5) are tagged with the reference (Service). Observe also
the service booklet.
11.2.1

Checking the online status (Service)

On the web interface welcome page, the WWW icon indicates
whether the energy storage system is connected to the VARTA
server (green = online, red = offline).
11.2.2

Error history (Service)

Reading out the error history

Select the System button from the header.

The error lists for the storage system and the grid and
system (GS) protection will be displayed (arrowed).
Error rectification

Verify the errors using the fault descriptions.

Check the GS settings if applicable. See Chapter 9.4.4.
Subject to alteration! Updated 11/2015 89