Ext. Relay (Optional); Subject To Alteration! Updated 11/2015; Portal (Optional) - Varta element 3 Instruction Manual


(2) Discharge power of the battery inverter in Watt
(W): The energy storage system is discharged to this
power.

(3) Power of the grid supply/grid draw (W): The power
supplied into the public grid or drawn from the public grid
is displayed.

(4) Operating state of the energy storage system: The
operating state, e.g. Standby, Operating, Passive, is
displayed.

(5) The state of charge of the energy storage system
in %: The charge level of the energy storage system is
displayed.

(6) WWW: Indicates whether the energy storage system
is connected to the VARTA server (green = online, red =
offline).

(7) i: Displays information about the storage system, e.g.
IP address, energy counter or the most recent grid fault.
To see further explanations, move the cursor over the symbols.
4.3.3

Ext. relay (optional)

Up to four external relays can be individually programmed for
controlling special functions, including switching loads or
generating units on and off. Clicking the Ext. relay button shows
the corresponding page.
This function is optional. A download available from www.varta-
storage.com provides further information.
4.3.4

Portal (optional)

The www.varta-storage-portal.com portal serves to monitor and
visualise the VARTA element 3 / element 6 energy storage

Subject to alteration! Updated 11/2015

29