Serial number of battery module 1 (battery module 2):
Enter the serial number(s) of the battery module/battery
modules here.
9.4.2
Network
By default, the storage device uses the customer's network
settings. Check the selection field next to Activate DHCP and
enter the network mask.
IP address: is read out automatically.
Network mask: must be entered manually if DHCP is not
activated.
DNS address: is read out automatically.
Gateway: is read out automatically.
DHCP: This option is used to activate the automatic
referencing of the customer's network parameters.
Subject to alteration! Updated 11/2015
81