Portal Connection - Varta element 3 Instruction Manual

8.7.4

Portal connection


Select the Network tab from Settings.
By default, the storage device uses the customer's network
settings. Check the selection field next to Activate DHCP and
enter the network mask.
If the parameters are not read out automatically, refer to the
instructions for the network router.
With standard DSL routers, DNS and gateway address are
usually identical. With company systems, they can differ. Release
of ports 4500, 21 and 37 is also required for the connection (does
not apply for all users).
See Chapter 9.4.2.
70
If IP address, DNS address and gateway are to
be set up statically, knowledge of the static
address assignment is required. This is needed
to read out the router's network configuration,
for example.
Subject to alteration! Updated 11/2015