11.4
Completion of service and repair work
DANGER!
11.4.1
Checking operating state
Make sure that no contamination or material residues are
inside the device. Clean using a vacuum cleaner or
similar if necessary.
Switch the master battery module back on.
Close the door and secure with screws.
Check whether the fuses have been re-connected.
Switch on the energy storage system using the On/Off
button. The button engages.
Check whether the LED ring indicates the following
operating states after switch on:
(1) flashes green (approx. 90 s),
(2) illuminates green (approx. 60 ) and then
(3) pulses green (= charging or discharging) or flashes
every 3 s (= standby).
106
The battery storage system components
conduct current after a restart. .
Mortal danger from electric shock!
Once all work is complete, restore connections
and attachments to a clean condition and
check!
Make sure nobody is in the hazard zone before
connecting the power supply!
Subject to alteration!
Updated 11/2015