Figure 22: On/Off Button - Varta element 3 Instruction Manual

Figure 22: On/Off button

The initialisation process can be tracked at the LED ring of the
On/Off button (see also Table 7):

Flashes green every second: System check (duration:
approx. 90 s).

Steady green light: The storage system is ready
(duration: approx. 60 s).

Steady red light: Probable error = the battery modules
have not yet been configured.
Continue with commissioning.
Note: If the LED ring fails to respond, check the following:

On/Off button correctly latched?

Fuses connected?

Grid connection correct?

Door contact switch not damaged?
Subject to alteration! Updated 11/2015 65