Varta element 3 Instruction Manual page 61


Fasten the battery module handles using the screws
supplied.
Aid: Hexagon socket driver, size 4

Press the activation button on the battery module (see
Figure 17.

The following LED indicator on the battery module
indicates standby mode:
Installing two battery modules (only VARTA element 6)
If two battery modules are installed, one module (Module 1) is
placed in the centre of the storage cabinet, the other (Module 2)
at the front. Module (1) is the master module. Module 2 is the
slave module.
Make the connections according to Figure 21 (see also Figure
17):
Make sure that the battery modules are
switched off and no LED indicator is lit.
Subject to alteration! Updated 11/2015 61