Removing And Connecting Battery Modules - Varta element 3 Instruction Manual


Press the activation button again to switch off the battery
module. (Hold down the button until the LED
extinguishes.)
If the battery module is contaminated, damaged
or not in standby mode, contact VARTA
Storage.
8.6.3

Removing and connecting battery modules

The battery modules are charged.
Uncontrolled discharge poses a risk of
property damage.
The battery modules must be switched off
ACHTUNG!
before being installed in the storage cabinet.
Up to two battery modules can be installed. The battery modules
are placed in a suspended position (see Figure 18).

Lift the battery module/battery modules onto the two
mounting rails using the handles.
Note: The battery power connection is on the left battery module.
Subject to alteration! Updated 11/2015 57