Figure 15: Wall Mounting Vatra Element 3/6 - Varta element 3 Instruction Manual

Changes to the factory settings require a
network connection.

Position cabinet at the installation location.

Screw your storage cabinet with suitable fasteners at the
back wall. For this, turn the mounting angle 90 °
outwards.

Figure 15: Wall mounting VATRA element 3/6


Set the screw feet to a height of approx. 4 cm (max. 5
cm).

Align the storage cabinet using a spirit level. A fine
adjustment can be made using the screw feet.
Subject to alteration! Updated 11/2015 53