Figure 19: Connecting The Battery Charger To One Battery - Varta element 3 Instruction Manual

Installing one battery module (only VARTA element 3)
Make the connections according to Figure 19 (see also Figure
17).
Figure 19: Connecting the battery charger to one battery module

Battery power connection: Position the plug on the
battery module and screw in place.

Communication 1: Insert the four wires into the
openings in the clamping connector on the battery
module. For the pin assignment, see Figure 20.
Note: The connections for error and warning messages are self-
clamping.
Subject to alteration! Updated 11/2015 59