Varta element 3 Instruction Manual page 63

Note: The connections for error and warning messages are self-
clamping.
Risk of property damage due to transposed
wires for error and warning messages!
Observe the colour-coding of the wires!
NOTICE!

Communication 2: Remove the blanking plug from the
RJ11 socket on the master module. Connect the RJ11
cable on the battery module.

Communication 3: Remove the RJ45 blanking plugs on
the battery modules.
Connect the two modules together by means of short
RJ45 cables.
Connect the master battery module to the battery charger
by means of long RJ45 cables.
Replace the second RJ45 blanking plug with a terminal
resistor on the slave module.

Push the master module onto the centre fastening holes
(see Figure 18 and the slave module onto the front
fastening holes.

Fasten the battery module handles using the screws
supplied.
Aid: Hexagon socket driver, size 4

Press the activation button on the master battery
module (see Figure 17).

The following LED indicator on the two battery modules
indicates standby mode:
Subject to alteration! Updated 11/2015 63