Figure 27: Removing The Battery Module - Varta element 3 Instruction Manual

Removing battery modules

Figure 27: Removing the battery module


Switch off the battery module at the activation button.
(Hold down the button until the LED extinguishes.)

Remove the following power cables:
 Battery power connection
 Comm 1 port, warning and error messages
 Comm 2 (RJ11)
 Comm 3 (RJ45)
Note: The battery power connection is easier to screw off once
the battery module has been removed.

Loosen the mounting screws (circled).
Aid: Hexagon socket driver, size 4
Subject to alteration! Updated 11/2015 101