Installing The Headlight Mask With The Headlight; Changing The Parking Light Bulb - KTM 690 enduro R EU Repair Manual

16 LIGHTING SYSTEM, INSTRUMENTS
16.5

Installing the headlight mask with the headlight

16.6

Changing the parking light bulb

Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
–
Disconnect the electrical plug-in connection
with the headlight.
800102-10
Main work
–
Connect the electrical plug-in connection
800102-11
–
Position the headlight mask and fix it with rubber band
Info
Make sure that the holding lugs engage in the fender.
–
Position the brake line and wiring harness. Position the clamp, and mount and
tighten screw
101063-11
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. (
.
3
p. 102)
and remove the headlight mask
3
.
1
.
2
p. 102)
103