2. Install the 8-32 blind nuts and secure with CA.
3. Use epoxy to glue the motor box together. The blind
nuts go to the inside.
4. Drill the fi rewall.
5. Install the RimFire 1.60 motor.
6. Mount the ESC. Connect the wires from the ESC to
the motor wires.
7. Attach the motor box to the fi rewall.
8. Connect a 16" (406mm) servo extension to the ESC.
Plug the ESC into the receiver.
9. Make a battery strap from the supplied hook and loop
material.
10. Install the battery strap on the battery tray.
22