3. Securely glue the receiver/receiver battery tray in the
fuselage.
4. Install the receiver and receiver battery.
5. Install the receiver battery switch and charge recepticle.
Connect the receiver battery to the switch and the switch
to the receiver.
6. Insert a 4-40 x 48" metal pushrod into the middle
pushrod tube.
7. Install the rudder servo and plug it into the receiver.
8. Install a 4-40 threaded clevis on the rudder pushrod.
Attach the control horn.
9. Position the rudder control horn.
10. Attach the rudder control horn.
19