GREAT PLANES Avistar 30cc ARF Instruction Manual page 24

7. Make 2 straps from the supplied hook and loop material.
8. Install the ignition switch.
9. Install the fuel tank strap.
6. Remove
the engine
and drill 3/16"
(4.8 mm) holes
through the
fi rewall for the
throttle and
choke.
10. Install the ignition
battery strap.
11. Wrap the ignition battery and ignition module in foam.
Install the ignition battery below the tray and the ignition
module on top of the tray. If the plane is set up with trike
gear, the battery and ignition module may need to be offset
to the side.
12. Install the tray. Connect the ignition battery and ignition
module to this switch.
13. Reinstall the engine.
14. Install the throttle servo and 6" servo extension and
plug it into the receiver.
24