GREAT PLANES Avistar 30cc ARF Instruction Manual page 9

1. Install a servo lead extension or S.Bus 1100 mm
decoder on the S3305 servo or 6" extension and 1000 mm
S.Bus hub on the S.Bus S3070HV servo.
2. Install grommets and eyelets on all servos.
3. Trim the covering from over the aileron servo opening.
4. Route the servo lead or the decoder lead through
the wing.
5. Drill servo screw mounting hole.
6. Install servo screws.
7. Connect the servo to the aileron channel on the
receiver. If using S.Bus, plug the Decoder or Hub into the
S.Bus port on the receiver. Switch on the transmitter and
receiver and install the servo horn.
8. Aileron pushrod components.
9