Install The Optional Trike Gear - GREAT PLANES Avistar 30cc ARF Instruction Manual

Install the Optional Trike Gear

(GPMA4568 and GPMA4561) (nose gear not included)
1. Install the main landing gear on the fuselage.
2. Remove the covering from over the nose gear wire exit.
3. Drill 11/64" (4.5mm) holes at the four nose gear bearing
marks.
4. Install the four 6-32 blind nuts in the front of the firewall.
Apply a drop of glue to each nut to hold it secure.
5. Separate the top and bottom of the nylon nose gear
bearing. Install the nose gear bearing on the back side of the
firewall. Before completely tightening the cap screws, insert
the nose gear wire to align the nose gear bearing.
6. Assemble the nylon steering arm.
7. File a flat spot on the nose gear wire so that when the
steering arm is installed it will be angled approximately 5 to
10 degrees from the axle.
17