System Id Setup Page - HP Pro 4300 Maintenance And Service Manual

3. Press
4. Go to Security > System ID's.
5. If necessary, press
6. Edit the fields listed. If the feature byte has data or is not editable, then it was not cleared and
cannot be edited.

System ID Setup Page

Setup Field Name
Product Name
Serial Number
SKU Number
Asset Tag
Feature Byte
Build ID
72 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis
F10 to enter Computer Setup.
Ctrl+A to initiate edit mode.
Enter the Model name/number or marketing name.
Enter the Serial Number of Unit.
Enter the SKU or Product Number including Localization Code.
Enter the 18-byte identifier assigned to the computer.
Enter the Feature Byte string. The feature byte string is case dependent.
The label includes spaces after every four characters. You can enter or
ignore these spaces – their only purpose is to help with data entry. There is
a character limitation of 40 bytes per line. When you reach this limit, go to
the next line to continue data entry. BIOS ignores the spaces and lines.
If you make an error during data entry, the data will not validate, and the
computer asks you to correct your data input.
The Build ID of the unit.
Comment Label
Flexbuild
Support
Support
Support
Flexbuild
Flexbuild