Spray Arm Fault - Miele G 7311 Operating Instructions Manual

Frequently Asked Questions

Spray arm fault

Problem
During the program and
at the end of the pro-
gram, the display shows
the following message:
Check spray arms
The dishwasher does
not turn off at the end
of the program.
The dishes may not be
clean because no deter-
gent was dispensed.
The  AutoDos func-
tion is automatically de-
activated during the
program sequence.
84
Possible cause and solution
The lower spray arm is blocked or the nozzles of the
lower spray arm are clogged. The  AutoDos func-
tion is automatically deactivated during the program
because the AutoDos detergent outlet cannot be
completely flushed out.
 Turn the dishwasher off and back on again.
Messages appear in the display.
 Perform a rotation check of the lower spray arm
and rearrange the wash items if they are blocking
the spray arm.
 Clean the lower spray arm (see "Cleaning the
spray arms" under "Cleaning and care").
 Select OK to confirm each message.
 Start the program again.