Tally T2030/24 Maintenance Manual page 41

Troubleshooting and Caring for the Printer Troubleshooting
Program your printer in the usual way for the test printout to change the parameters. See
Part II of the T2030/T2130 Operator's Manual, chapter 1, Programming via the operat-
ing panel .
By pressing the key Setup you exit Setup mode and the printer once again returns to
Test mode.
Online
Testmode Off
Park < > LF/FF
Setup
Test mode Off is displayed. Press the key Online, the test printout starts.
The self-test can be interrupted by pressing the key Online which will stop printing
and put the printer into Offline status.
In the Rolling ASCII test, setup can be used for selecting a different font or another
CPI, without exiting the test.
Some changes in menu mode cause the printer to initialize, and consequently the
Rolling ASCII test is broken off.
Example of an ASCII test printout
This test can also be used to determine and set the optimal print head gap (see Part I
of the T2030/T2130 Operator's Manual, Setting the print head distance).
Exiting Test mode
Test mode can only be terminated by switching off the printer.
Stop the test printout by pressing the key Online before you switch off the printer.
STOP
4-7