Detaching and Attaching of Parts Instructions for Dissassembly and Assembly
5-36
[6]
[4]
Fig. 5-46: Pinch Roller (1), Step 2
10. Take out the Pinch Roller (1) [6], first in direction [a] then direction [b].
Fig. 5-47: Pinch Roller (1), Step 3
Attaching
1.
To attach, reverse the detaching procedure.
Note 1: When attaching the Spring Assembly, attach it with the positioning protrusion
fitting in the hole for the spring.
Note 2: Be sure to adjust the gap between the Print Head (24L) and the Platen
Assembly (refer to Section 6.1).
[7]
[8]
a
b
[9]
[9]
[4]
[6]
[5]