Tally T2030/24 Maintenance Manual page 179

Instructions for Dissassembly and Assembly Detaching and Attaching of Parts
5.1.59
Frame (R) Assembly Detaching
1. Detach the Side Cover R (refer to Section 5.1.41).
2. Detach the Manual Guide Rail (R) (refer to Section 5.1.45).
3. Detach the ASF Card Assembly (refer to Section 5.1.46).
4. Detach the Earth ASF 1 (refer to Section 5.1.47).
5. Detach the ASF Motor Assembly and the OP Cable (refer to Section 5.1.48).
6. Detach the Latch (R) Assembly, Link (2) Assembly, and Link (3) Assembly on the
Frame (R) Assembly side (refer to Section 5.1.50).
7. Remove the E-ring [1] that has been securing the Shaft Pick Up Roller on the
Frame (R) Assembly side, and detach the Pick Up Roller Gear [2].
8. Remove the E-ring [3], and detach the two Gears [4] and [5].
Fig. 5-115: Frame (R) Assembly, Step 1
[4]
[2]
[1]
[5]
[3]
5-95