Tally T2030/24 Maintenance Manual page 118

Detaching and Attaching of Parts Instructions for Dissassembly and Assembly
5-34
[4]
[5]
Fig. 5-43: Carrier Assembly, Step 2
11. Withdraw the Carrier shaft [8] from the Frame (L) Assembly and the Frame (R)
Assembly, and detach the entire Carrier Assembly [2].
12. Detach the Carrier Shaft from the Carrier.
Be careful not to lose the Oil Felt [9] that has been placed under the Carrier.
[8]
Fig. 5-44: Carrier Assembly, Step 3
Attaching
1. To attach, reverse the detaching procedure.
Note 1: Be sure to attach the Oil Felt under the Carrier.
Note 2: Attach the Gap Set Collar to the right of the Carrier Shaft.
Note 3: Be sure to adjust the gap between the Print Head (24L) and the Platen
Assembly (refer to Section 6.1).
[7]
[6]
[4]
[9]
[2]
[6]